Yamaha 12mm FootPegs Buddy Pillion Foot Pegs Rests AT CT DT LT RT HT 100 125

BRAND NEW NOS Aftermarket pair of Buddy / Foot Pegs

These are the 12mm version, so make sure you have a 12mm x 1.25 threaded hole, or that you have a 12mm hole that the stud can go thru, and you would use the included nut to tighten them down. 

These high strength pegs are to be used for your rear passenger. They are not designed to stand on them while riding. They are only meant to be used to get on an off of the bike, an to rest your feet while riding. 

The high quality rubber will not split or crack from the weather or from normal use. The mount is designed to be able to flip the pegs out of the way, when not in use. 

Will fit the models listed in Fitment, and may fit: DT100, DT 100, DT-100, DT125, DT 125, DT-125, DT175, DT 175, DT-175, DT250, DT 250, DT-250 and newer Enduro models, but see note below.

Note: Please make sure you need a 12mm (bolt diameter) x 25mm (length of bolt).

Brand: 2FastMoto. | Type: Bolt On Foot Peg. | Manufacturer Part Number: 2FM-54-05412 / - 32f7b6ca-856. | Warranty: 90 Day. | Bolt Size: 12mm x 1.25. | CCP Ref Number: 2FM-54-05412 / 54-05412. |