2FastMoto Lighted Spark Plug Cap
Lighted Spark Plug Cap - Will work with all 6 volt and 12 volt coils and ignition systems!
Cap Lights up to show the Electrical Current! Looks like Neon Lighting!
Easily threads onto the Spark Plug Wire
These caps will only snap on to a spark plug with a terminal nut. If you have a Terminal Stud you will have to either put a terminal nut on the plug, or switch to a spark plug that has them. Most plugs come with the optional nut. Please note this BEFORE making a purchase!
Wire Diameter: 7mm
Cap Length: 80mm
Cap Height: 44mm
Cap Type: Plastic 90 degree - with Rubber Boots for all weather protection
Cap Color: Clear
NOTE: You must screw the spark plug cap onto the wire! Also, as a reminder, you WILL NOT have any CONTINUITY with these caps! This does not mean they are bad, but rather it's the nature in which these caps work. They require a large amount of voltage, as you would have from any coil, to actually create the spark inside the cap (thus showing you the light), and then making contact with the end of the cap and thru the actual spark plug.
FITS Most Motorcycle Coils that use a 7mm Wire!