Brand New 2FastMoto 12 volt, high performance, dual feed/single output, 3 ohm "Dynatek" style DC3-1 ignition coil. For engines
using 1 spark plug per cylinder and has an "Angled Tower" ouput. This high tech, top quality coil is designed for maximum performance. It produces spark voltages in
excess of 30,000 volts and spark energies second to none. This coil was made to replace stock coils and will work with aftermarket electronic ignitions and factory
electronic ignitions. Before selecting a coil, check the coil primary resistance requirements as specified by the manufacturer of the ignition being used. Stock coil
resistance should be within 10% of our 2FastMoto high output coil. Sold by the each. Comes with everything shown in images above.
FEATURES and BENEFITS:
No exposed lamination's to rust and degrade performance.
High voltage and primary terminals machined from brass.
Ultrasonically welded and sealed against moisture.
Compact size fits easily under stock covers.
Peak gap current in excess of 50mA.
High impact thermoplastic housing.
Over 30,000 volts output.
Accepts 7 to 8.8mm wires.
Installation instructions included.
Mounting hardware included.
Economically priced.
Note: Some bracket or wiring modifications might be required.
ITEM SPECS
Primary resistance 3.0 Ohms +/- 10%
Secondary Resistance 13k Ohms +/- 10%
Battery Voltage 12v