Brand New 2FastMoto 12 Volt, high performance, dual feed/dual output , 5 ohm "Dynatek" style DC8-1 ignition coil with "Angled Tower" outputs. Produces over 30,000
Volts with spark energies second to none . Designed to work with any Dyna, aftermarket or stock electronic ignition system. Can be used for single or dual-plug
applications. This high tech, top quality coil is designed for maximum performance. Before selecting a coil, check the coil primary resistance requirements as specified by
the manufacturer of the ignition being used. Stock coil resistance should be within 10% of our 2FastMoto high output coil. Sold by the each. Comes with everything
shown in images above.
No exposed laminations to rust and degrade performance.
High voltage and primary terminals machined from brass.
Ultrasonically welded and sealed against moisture.
Compact size fits easily under stock covers.
Peak gap current in excess of 50mA.
High impact thermoplastic housing.
Over 30,000 volts per output.
Accepts 7 to 8.8mm wires.
Installation instructions included.
Mounting hardware included.
Primary resistance 5.0 Ohms +/- 10%
Secondary Resistance 17k Ohms +/- 10%
Battery Voltage 12v